Connect with us

Components

Review: HP V10 DDR4 RGB by BIWIN

Published

on

When it comes to memory modules HP is not a brand that immediately comes to mind. However, Biwin has been producing these under license from HP under the HP V10 RGB series. The company offers DIYers with sets of two and four modules of RAM or 16GB with operating frequencies of 3200, 3600, and 4000 MHz. The one we received for this review is a 16GB X 2 3600MHz memory kit.

One of the standout features of the modules is that it uses Samsung’s B-die DDR4 SDRAM chips. The HP V10s come in 8GB (2x8GB) or 16GB (2x16GB) dual kits. These memory modules also support Intel’s XMP 2.0 overclocking profiles. What’s more, the HP V10 RGB RAM Kits are also equipped with RGB backlight cooling radiators.

In order to control and synchronise the RGB backlight with other PC components, you can use software such as ASUS Aura, Gigabyte RGB Fusion, MSI Mystic Light, and Polychrome Sync ASRock. The module itself offers intense RGB lighting, with eight independent lighting areas, 16 million colours, and more than 10 lighting controls.

The modules offer hair-line finished aluminum heat-spreaders in order to assure gamers get DDR4 gaming overclocking memory with excellent quality and optimised performance. HP also offers a five-year limited warranty on these kits. The high-quality 10-layer PCB board ensures the V10 can offer more stable signal transmission. The 15μm gold-plated contacts improve the oxidation resistance to add stability and better data transmission.

If you are huge into RGB-based components, then you will appreciate the new HP V10 DDR4 RGB, since it really goes well with a gaming setup, without looking too gaudy. We ran the Memory Mark benchmark on these modules and we came away impressed. It clocked a total of 2891 points at 3600MHz.

The read and write speeds were also quite good, while the latency was on the lower side. The amount of memory you need depends on your tasks and demands. These days, 8GB is the minimum, which should see most people through daily computing needs, even casual gaming, graphics design, and even photo and video editing. The HP V10 DDR4 RGB 2X16GB kit will offer enough memory to support all your computing needs.

HP V10 DDR4 RGB by BIWIN TBA
  • Final Rating
3

Summary

The modules offer hair-line finished aluminum heat-spreaders in order to assure gamers get DDR4 gaming overclocking memory with excellent quality and optimised performance. HP also offers a five-year limited warranty on these kits. The high-quality 10-layer PCB board ensures the V10 can offer more stable signal transmission. The 15μm gold-plated contacts improve the oxidation resistance to add stability and better data transmission.

Sending
User Review
0 (0 votes)
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Components

Cooler Master Debuts LCD-Sporting MasterLiquid 360 Ion Cooler

Published

on

Cooler Master, a renowned name in PC components, today unveiled the MasterLiquid 360 Ion, its most advanced all-in-one (AIO) liquid cooler. The MasterLiquid 360 Ion boasts several groundbreaking features, including the first-ever LCD integrated into an AIO cooler. This flagship cooler promises exceptional cooling performance for even the most demanding PCs. Here’s a closer look at what sets it apart:

  1. Pioneering LCD Display: The MasterLiquid 360 Ion features a unique 2.1-inch IPS LCD screen embedded directly into the pump. This display is fully customizable using Cooler Master’s MasterCTRL software, allowing users to monitor system vitals like CPU temperature, or showcase personalized graphics and animations.
  2. Dual-Chamber Cooling Power: The MasterLiquid 360 Ion utilizes Cooler Master’s Gen X Dual Chamber Design, which optimizes thermal efficiency by separating the hot and cold coolant channels for improved heat dissipation.
  3. Unmatched Cooling Performance: Three Mobius 120P ARGB fans are included with the cooler, delivering exceptional airflow and keeping your system cool under pressure.
  4. Extensive Personalization: The MasterLiquid 360 Ion caters to individual preferences. Addressable RGB lighting on the fans and pump allows for vibrant lighting effects, while automatic PWM control ensures optimal fan speed based on system needs. Compatibility with major motherboards guarantees seamless integration into existing setups.
  5. Simplified Installation: Cooler Master streamlines the installation process with pre-attached Mobius 120P ARGB fans and a user-friendly bracket design.

The MasterLiquid 360 Ion marks a significant leap forward in AIO cooler technology. Its innovative features and emphasis on user customization make it a compelling choice for PC enthusiasts seeking peak performance and a touch of personalized style in their builds.

Continue Reading

Components

CORSAIR Debuts Daisy-Chainable RS Series Fans

Published

on

CORSAIR has launched its latest line of cooling fans today – the RS Series. Designed for both seasoned PC builders and newcomers, the RS Series promises impressive cooling performance with a focus on ease of use and affordability. The RS Series boasts a streamlined design that simplifies installation. The fans connect in a daisy-chain fashion, requiring only a single 4-pin PWM connector to your motherboard. This eliminates cable clutter and keeps your build looking clean.

For those who prefer a touch of visual flair, the RS ARGB version offers addressable RGB lighting that plugs into a single +5V ARGB header on your motherboard. Both versions feature Zero RPM Mode, which keeps the fans silent during low-load situations. The RS Series incorporates CORSAIR AirGuide Technology, which channels airflow precisely towards critical components. Additionally, the fans utilize magnetic dome bearings, known for minimizing noise and friction while ensuring a long lifespan.

The RS Series comes in 120mm and 140mm sizes, available in black or white to match your build’s aesthetics. Whether you’re a seasoned enthusiast or building your first PC, there’s an RS fan to meet your needs. RS and RS ARGB fans are available now in single and multi-fan packs from the CORSAIR webstore and authorized retailers worldwide. The fans are backed by a two-year warranty and CORSAIR’s customer service and technical support network.

Continue Reading

Components

CORSAIR Launches LX RGB Fans

Published

on

CORSAIR has launched the LX RGB Series of cooling fans, the latest addition to the acclaimed iCUE LINK ecosystem. Proving that amazing lighting and high-performance cooling are not mutually exclusive, the LX RGB Series redefines the expectations of PC enthusiasts – and thanks to iCUE LINK, makes building and connecting your masterpiece easy and convenient. Available in 120mm and 140mm sizes, in your choice of black or white to match the aesthetic of your build, each LX RGB fan features 18 individually addressable RGB LEDs spread across an inner and outer light loop, creating spectacular, fully customizable lighting effects – including the iCUE LINK-exclusive Time Warp mode that creates mesmerizing optical illusions.

All of this is made possible by the new and improved iCUE 5 software, making it easier than ever before to customize and switch between lighting effects or synchronize them with your games. These great looks are backed up by rigorous engineering and meticulous testing to deliver strong, efficient cooling to match. A combination of high airflow, reaching PWM-controlled speeds up to 2,400 RPM, and high static pressure make LX RGB fans well suited for use as case fans or attached to radiators. CORSAIR AirGuide Technology, with its anti-vortex vanes, also focus airflow direction to move air more efficiently through your case.

Moreover, the LX RGB Series is designed for quiet operation, with Magnetic Dome bearings minimizing friction to ensure low noise and superior longevity. Zero RPM Mode completely eliminates fan noise at low loads, with the fans spinning up only when your system demands it. Installation is made effortless with CORSAIR’s innovative one-twist QuikTurn screws, empowering you to install a full set of fans in seconds, saving both time and effort. iCUE LINK bridge connectors included with the fans let you stack them directly together to create a seamless bank of fans with no intervening wires, making installation even easier.

With the LX RGB Series, CORSAIR continues to push the boundaries of PC cooling and aesthetics with a powerful one-two punch of brilliant lighting and exceptional cooling. The LX RGB Series is available now in multi-fan Starter Kits with an iCUE LINK System Hub or single fan Expansion Kits from the CORSAIR webstore and the CORSAIR worldwide network of authorized retailers and distributors.

Continue Reading
Advertisement

Latest Reviews

Follow us on Facebook